Journal Articles

1.       M. Nikkhah, J. S. Strobl, B. Peddi and M. Agah, "Cytoskeletal Role in Differential Adhesion Patterns of Normal Fibroblasts and Breast Cancer Cells inside Silicon Microenvironments, " Biomedical Microdevices (in press).

2.       M. Nikkhah, J. S. Strobl and M. Agah, "Attachment and Response of Fibroblast and Human Breast Cancer Cells to Isotropic Silicon Microstructures of Different Geometries," Biomedical Microdevices (in press).

3.       M. A. Zareian-Jahromi, M. Ashraf-Khorassani, L. T. Taylor, and M. Agah, "Design, Modeling and Fabrication of MEMS-Based Multicapillary Gas Chromatography Columns," IEEE/ASME J. of Microelectromech. Systems, Vol. 18, No. 1, 2009, pp. 28-37.

4.       B. Alfeeli, D. Cho, M. Ashraf-Khorassani, L.T. Taylor and M. Agah, "MEMS-Based Multi-Inlet/Outlet Preconcentrator Coated by Inkjet Printing of Polymer Adsorbents", Sensors and Actuators B, Chemical, Vol. 133, No. 1, 2008, pp. 24-32.

5.       K. Gantz, L. Reneghan and M. Agah, "Development of a comprehensive model for RIE-lag-based three-dimensional microchannel fabrication," Journal of Micromechanics and Microengineering (JMM), Vol. 18 (025003), 2008.

6.       S. Reidy, D. George, M. Agah, and R. Sacks, "Temperature-programmed GC using silicon microfabricated columns with integrated heaters and temperature sensors," Analytical Chemistry, Vol. 79, Apr 2007, pp. 2911-2917.

7.       M. Agah and K. D. Wise, "Low-Mass PECVD Oxynitride Gas Chromatographic Columns," IEEE/ASME J. Microelectromech. Systems, Vol. 16, No. 4, Aug. 2007, pp.:853 – 860.

8.       M. Agah, G. R. Lambertus, R. D. Sacks, and K. D. Wise, "High-Speed MEMS-Based Gas Chromatography," IEEE J. Microelectromech. Systems, Vol. 14, No. 5, 2005, pp. 1039-1050.

9.       M. Agah, J. A. Potkay, G. R. Lambertus, R. D. Sacks, and K. D. Wise, "High-performance Temperature-Programmed Microfabricated Gas Chromatography Columns," IEEE J. Microelectromech. Systems, Vol. 14, No. 5, 2005, pp. 1039-1050.

10.   Chia-Jung Lu,, William H. Steinecker, Wei-Cheng Tian, Masoud Agah, Joseph A. Potkay, Michael C. Oborny, Jamie Nichols, Helena Chan, Jeffrey Driscoll, Richard D. Sacks, Stella W. Pang, Kensall D. Wise, Edward T. Zellers, "First Generation Hybrid MEMS Gas Chromatograph," Lab On A Chip, Vol. 5, 2005, pp. 1123-1131.

11.   G. Lambertus, A. Elstro, K. Sensenig, J. Potkay, M. Agah, S. Scheuering, K. Wise, F. Dorman, and R. Sacks, "Design, Fabrication and Evaluation of Microfabricated Columns for Gas Chromatography," Analytical Chemistry, Vol. 76, 2004, pp. 2629-2637.

Conference Papers

1.       M. A. Zareian-Jahromi and M. Agah, "Micro Gas Chromatography Multicapillary Columns with Mono-Layer Protected Gold as a Stationary," Proceedings of the 22nd Annual IEEE Conference on Micro Electro Mechanical Systems (MEMS), Sorrento, Italy, January 25-29, 2009.

2.       M. Nikkhah, J. S. Strobl, and M. Agah, "Study the Effect of Anticancer Drugs on Human Breast Cancer Cells Using Three Dimensional Silicon Microstructures," ASME International Mechanical Engineering Congress and Exposition (IMECE), Boston, MA, Oct. 31-Nov. 6, 2008.

3.       B. Alfeeli and M. Agah, "Micro Preconcentrator with Embedded 3D Pillars for Breath Analysis Applications," 7th IEEE Sensors Conference, Lecce, Italy October 26-29, 2008, pp. 736-739.

4.       B. Alfeeli, S. Ali, V. Jain, R. Montazami, J. Heflin, and M. Agah, "MEMS-Based Gas Chromatography Columns with Nano-Structured Stationary Phases," 7th IEEE Sensors Conference, Lecce, Italy October 26-29, 2008, pp. 728-731.

5.       S. Raman, A. MacKenzie, L. DaSilva, C. Maxey, M. Agah, and A. Bell, "A First-Year Engineering Experience in Wireless Sensor Networks For Electrical/Computer Engineering and Computer Science Students," 2008 ASEE Annual Conference and Exposition, June 22 – 25, Pittsburgh, PA.

6.       P. Zellner and M. Agah, "A Single Mask, Single-Etch Process For Constructing Three Dimensional Micro-Total Analytical Systems," 12th International Conference on Miniaturized Systems for Chemistry and Life Sciences (MicroTAS 2008), San Diego, CA, October 12-16, 2008, pp. 345-347.

7.       M. Nikkhah, J. Strobl, A. Omotosho, and M. Agah, "Attachment and Growth Behavior of Metastatic Human Breast Cancer Cells in MEMS-Based Silicon Microenvironments," 12th International Conference on Miniaturized Systems for Chemistry and Life Sciences (MicroTAS 2008), San Diego, CA, October 12-16, 2008, pp. 1819-182.

8.       M. A. Zareian-Jahromi, M. Ashraf-Khorassani, L. T. Taylor, and M. Agah, "Design, Modeling and Fabrication of MEMS-Based Multicapillary Gas Chromatography Columns," North American Solid-State Sensors, Actuators, and Microsystems Workshop, Hilton Head Island, SC, June 1-5, 2008, pp. 256-259.

9.       B. Alfeeli, M. Ashraf-Khorassani, L. T. Taylor, and M. Agah, "Multi-Inlet/Outlet Preconcentrator With 3-Dμ-Structures Coated By Inkjet Printing of Tenax TA," North American Solid-State Sensors, Actuators, and Microsystems Workshop, Hilton Head Island, SC, June 1-5, 2008, pp. 118-121.

10.   J. Strobl, M. Nikkhah, and M. Agah, "Application of microengineered silicon chips to the study of human metastatic breast cancer and responses to histone deacetylase inhibitors," American Association for Cancer Research Special Conference on Advances in Breast Cancer Research: Genetics, Biology, and Clinical Applications, San Diego, CA, October 17-20, 2007.

11.   M. Nikkhah, J. Strobl, and M. Agah, "Geometry-Dependent Behavior of Fibroblast Cells in Three-Dimensional Silicon Microstructures," 29th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (IEEE EMBC 2007), Lyon, France, August 23-26, 2007, pp. 6077-6080.

12.   M. Nikkhah, J. Strobl, and M. Agah, "Fibroblast and Cancer Cell Behaviors in Three-Dimensional Silicon Microstructures," 11th International Conference on Miniaturized Systems for Chemistry and Life Sciences (MicroTAS 2007), Paris, France, Oct. 7-11, 2007, pp. 727-729.

13.   S. Ali, M. A. Zareian-Jahromi, M. Ashraf-Khorassani, L. T. Taylor, and M. Agah, "Semi-Packed Micro Gas Chromatography Columns," 11th International Conference on Miniaturized Systems for Chemistry and Life Sciences (MicroTAS 2007), Paris, France, Oct. 7-11, 2007, pp. 239-241.

14.   K. Gantz and M. Agah, “Predictable three-dimensional microfluidic channel fabrication in a single-mask process," Technical Digest of the 14th International Conference on Solid-State Sensors, Actuators, and Microsystems (Transducers07), Lyon, France, June 10-14, 2007, pp. 755-758.

15.   M. Agah and K. D. Wise, "PECVD-Oxynitride Gas Chromatographic Columns," IEEE International Electron Devices Meeting, IEDM‘05, Washington, DC, Dec. 5-7, 2005, pp. 311-314.

16.   M. Agah and K. D. Wise, "A Fully-Dry PECVD-Oxynitride Process for MicroGC Column Fabrication," Proceedings of the 18th IEEE Conference on MEMS, Miami, FL, 2005, pp. 774-777.

17.   M. Agah, G. R. Lambertus, R. D. Sacks, and K. D. Wise, "High-Speed MEMS-Based Gas Chromatography," IEEE International Electron Devices Meeting, IEDM’04, San Francisco, CA, Dec. 13-15, 2004, pp. 27-30.

18.   M. Agah, J. Potkay, A. Elstro, G. Lambertus, R. Sacks, and K. Wise, "A High-Performance Temperature-Programmed Gas Chromatography Column," North American Solid-State Sensors, Actuators, and Microsystems Workshop, Hilton Head Island, SC, June 6-10, 2004, pp. 302-305.

19.   Zellers, E. T., et al., "A Versatile MEMS Gas Chromatograph for Environmental Vapor Mixture Analysis," (Invited) Proceedings Solid-State Sensor, Actuator, and Microsystems Workshop, Hilton Head Island, SC, June 6-10, 2004, pp. 61-66.

20.   C.-J. Lue, W.-C. Tian, W. H. Steinecker, A. Guyon, M. Agah, M. C. Oborny, R. D. Sacks, K. D. Wise, S. W. Pang, E. T. Zellers, "Functionally Integrated MEMS Micro Gas Chromatograph Subsystem," Proceedings of the seventh International Conference on Micro Total Analysis Systems – MicroTAS 2003, Squaw Valley, California, Oct. 5-9, 2003, pp. 411-415.

21.   M. Agah, J. A. Potkay, J. A. Driscoll, R. D. Sacks, M. Kaviany, and K. D. Wise, "Thermal Behavior of High-Performance Temperature-Programmed Microfabricated Gas Chromatography Columns," Technical Digest of the 12th International Conference on Solid-State Sensors, Actuators and Microsystems, Boston, Massachusetts, June 8-12, 2003, pp. 1339-1342.

22.    J. A. Potkay, J. A. Driscoll, M. Agah, R. D. Sacks, and K. D. Wise, "A High-Performance Microfabricated Gas Chromatography Column," Proceedings of the Sixteenth Annual IEEE Conference on Micro Electro Mechanical Systems (MEMS), Kyoto, Japan, January 19-23, 2003, pp. 395-398.

 

Patents

1.      Kensall D. Wise, Richard D. Sacks, Katharine T. Beach, Joseph A. Potkay, and Masoud Agah, "Separation Microcolumn Assembly for a Microgas Chromatograph and the Like," January 4, 2005, US Patent NO. 6838640.

2.      Kensall D. Wise, Richard D. Sacks, Joseph A. Potkay, and Masoud Agah, "High-Performance Separation Microcolumn Assembly and Method of Making Same," Patent Pending (filed July, 2004).